Zadania z chemii IB SL

(d) The student used distillation to obtain pure propanoic acid from the reaction mixture. State two impurities, apart from unreacted propan-1-ol, that were present in the propanoic acid before distillation.

Explain how the 0.2000 $\mathrm{mol\,dm^{-3}}$ solution is prepared in a volumetric flask from the weighed solid.

Suggest how to prepare 100.0 $\mathrm{cm^3}$ of a 0.05000 $\mathrm{mol\,dm^{-3}}$ sodium thiosulfate solution from the 0.2000 $\mathrm{mol\,dm^{-3}}$ solution.

State one safety concern arising from a product of this reaction, and a precaution that should be taken because of it.

Before use, the EDTA solution was standardized against a standard solution of $\ce{Cu^2+}$ ions. An accurately weighed piece of pure copper wire was dissolved in the minimum volume of concentrated nitric acid and the mixture was warmed gently until no more…

Anhydrous copper(II) chloride, $\ce{CuCl2}$, takes up water vapour from the air, so it cannot be weighed out accurately to make a standard solution. Suggest a laboratory procedure that would remove all of the absorbed water from a sample of solid $\ce{CuCl2}$…

Portions of the rinse water were then titrated with the standardized EDTA solution in the presence of murexide as indicator. The burette readings are given in the table. Trial 1 Trial 2 Trial 3 Trial 4 Final burette reading / $\mathrm{cm^3}$ (± 0.05…

(i) Suggest, giving a reason for each, two different safety precautions that should be taken when carrying out either of these preparations. (ii) Deduce the coefficients needed to balance the following equation for the reaction of silver with concentrated…